ICF Construction Ireland glossary of terms & specs
Understand every material, sub-base specification and trade term on your written quote.
Free, no obligation. One local specialist covering your area replies, not five.
- €55,000 to €125,000for an engineered ICF structural shell (raft, poured ICF walls, upper floor & roof)
- €2,350 to €3,100/m²turnkey A1-rated ICF house build cost in Ireland (€280,000–€550,000+)
- 0.11 to 0.15 W/m²Kcontinuous EPS insulated wall U-values with <0.6 ACH airtightness
- 2 to 3 weekstypical ICF wall erection & concrete pour to roof plate in damp Irish weather
15 key terms explained in plain English
- Insulated Concrete Formwork (ICF)
A modern permanent shuttering building system where hollow, interlocking twin-leaf Expanded Polystyrene (EPS) blocks are dry-stacked, reinforced internally with steel rebar, and filled with structural ready-mix concrete to form a monolithic, super-insulated load-bearing wall.
- Graphite-Enhanced EPS (Neopor)
Grey expanded polystyrene infused with microscopic graphite particles that reflect radiant heat, improving thermal conductivity to ~0.031 W/mK and achieving 0.11–0.15 W/m²K U-values in slimmer wall profiles.
- Polypropylene Internal Web Ties
High-strength moulded plastic structural bridges spaced every 150mm–200mm inside an ICF block that hold the two EPS leaves apart against liquid concrete hydrostatic pressure, clip horizontal rebar in position, and act as screw-fixing furring strips for plasterboard.
- B500B High-Yield Steel Rebar
Ribbed structural carbon-steel reinforcement bars placed horizontally on courses and vertically from the foundation starter dowels inside the ICF cavity before concrete is pumped.
- Monolithic Concrete Core (150mm / 200mm)
The continuous, joint-free structural C28/35 or C32/40 concrete wall cast inside ICF blocks — typically 150mm thick for two-storey houses and 200mm–250mm for basements, tall gables or heavy commercial loads.
- U-Value (W/m²K)
Rate of heat loss through 1 m² of building fabric per degree Kelvin difference indoors to outdoors. Irish NZEB Part L sets a 0.18 W/m²K wall backstop; ICF walls routinely deliver 0.11 to 0.15 W/m²K.
- Airtightness (ACH @ 50 Pa & q50)
Air Changes per Hour measured by a blower-door fan pressurisation test at 50 Pascals. Certified Passive House requires <=0.6 ACH @ 50 Pa, which poured concrete ICF cores achieve reliably without fragile wet parge coats.
- Insulated EPS Passive Raft Foundation
A structural reinforced concrete ground slab cast inside an L-shaped cradle of 300mm high-density closed-cell EPS insulation, eliminating the perimeter wall-to-floor cold bridge.
- Window Buck (Structural Reveal Frame)
A treated plywood, timber or insulated composite perimeter frame installed inside an ICF wall opening prior to pouring concrete, retaining the wet concrete and providing an airtight mounting surface for triple-glazed windows.
- NSAI Agrément & ETA Certification
Independent technical approvals issued by the National Standards Authority of Ireland (NSAI) or a European Technical Assessment body verifying an ICF system's structural, fire, thermal and durability compliance under Irish Building Regulations.
- BCAR (Building Control Amendment Regulations)
Irish statutory inspection and sign-off framework (S.I. No. 9 of 2014) under which Design Certifiers, Assigned Certifiers and Chartered Structural Engineers inspect reinforcement and concrete pours on new dwellings.
- Precast Concrete Hollowcore Slab
Factory-prestressed concrete floor planks craned directly onto load-bearing ground-floor ICF concrete cores to create rigid, quiet upstairs floors ideal for screeded underfloor heating.
- BS 8102 Basement Waterproofing (Type A & B)
The British & Irish engineering code of practice for below-ground structures, combining Type B structurally integral crystalline waterproof concrete inside the ICF core with Type A external bonded tanking membranes.
- Polymer-Modified Silicone Thin-Coat Render
A flexible, breathable external render system reinforced with alkali-resistant fibreglass mesh applied directly to keyed EPS ICF faces to resist hairline cracking and Atlantic driving rain.
- MVHR (Mechanical Ventilation with Heat Recovery)
Whole-house ducted ventilation that extracts stale moist air from bathrooms and kitchens while transferring ~90% of its warmth to incoming fresh filtered outdoor air in airtight (<0.6 ACH) ICF homes.
Get an ICF shell or turnkey quote for your build
Select your project type, planning stage and county. Your enquiry goes to one experienced ICF contractor covering your county, who reviews your drawings, specifies block thickness and concrete core, and quotes in writing.
ICF construction guides, U-values & 2026 price breakdowns
Straight answers to what homeowners ask most: itemised 2026 costs, material specifications, drainage & planning rules, and what to check before you book.
More guides & resources: All guides & calculator hub · Technical & trade glossary · Frequently asked questions · All areas covered · Editorial standards · Contact · About this site
Common specification questions
How much does it cost to build an ICF house in Ireland in 2026?
In 2026, erecting an ICF wall superstructure (interlocking graphite EPS blocks, steel rebar, alignment bracing, pump hire and C30/37 structural concrete) costs €210 to €310 per m² of wall area. A complete ICF structural shell package — insulated raft foundation, poured ICF ground and first-floor walls, precast hollowcore or posi-joist upper floor and roof structure — typically ranges from €55,000 to €125,000 depending on footprint. Full turnkey A1-BER one-off ICF houses cost €2,350 to €3,100 per m² (€280,000 to €550,000+ including 13.5% construction VAT).
Is ICF construction cheaper or more expensive than traditional cavity blockwork in Ireland?
At raw shell stage, ICF walls typically cost 3% to 7% more in materials than standard 100mm + 150mm cavity blockwork, or roughly break even once wide-cavity full-fill bead plus internal insulated dry-lining and airtightness parge coats are priced on a block house. Because ICF walls go up in 2 to 3 weeks regardless of light rain, require less scaffolding hire, achieve 0.11–0.15 W/m²K out of the box, and allow smaller heat-pump sizing, total turnkey costs to Passive/A1 standard are regularly comparable to or lower than cavity block.
Can you get a mortgage, HomeBond warranty and BCAR sign-off for an ICF house in Ireland?
Yes. Mainstream Irish mortgage lenders (AIB, Bank of Ireland, PTSB and EBS), structural warranty providers and BCAR Assigned Certifiers accept ICF builds provided the block system holds a valid NSAI Agrément certificate or European Technical Assessment (ETA / CE mark), the concrete core and reinforcement schedule are signed off by a Chartered Structural Engineer (MIEI / MIStructE), and poured lifts are inspected before closing.
What U-values and airtightness ratings do ICF walls achieve?
Standard dual-100mm graphite-enhanced EPS ICF blocks poured with a 150mm reinforced concrete core deliver a wall U-value of 0.14 to 0.15 W/m²K — comfortably beating Ireland's NZEB Part L wall requirement (0.18 W/m²K). Upgrading the outer EPS leaf to 150mm–200mm lowers the U-value to 0.11 W/m²K for certified Passive House projects. Because the poured concrete core forms a continuous, joint-free structure, blower-door tests routinely record <0.6 ACH @ 50 Pa when paired with taped window bucks and MVHR.
ICF construction contractors across all 26 counties
Enquiries from all 26 counties go to one experienced ICF construction specialist covering your county — from Dublin, Cork, Galway and Meath to Kildare, Wicklow, Limerick, Wexford and Donegal. Pick your county below for local CSO one-off build stats, Met Éireann wet-weather build notes and 2026 ICF prices. Compare all areas covered →
Have floor plans or pricing an ICF self-build or extension?
One experienced ICF contractor covering your county reviews your architectural drawings, calculates EPS block U-values, rebar and concrete volumes, and provides a written itemised quote.