ICF basements, split-level homes & sloping sites in Ireland
In 2026, split-level ICF lower-ground storeys in Ireland cost €2,550 to €3,400 per m² and full habitable underground BS 8102 waterproof ICF basements cost €2,900 to €4,100 per m², combining permanent concrete shuttering, structural earth retention and continuous insulation.
Turn a steep coastal or hillside plot into a warm, dry split-level home without double-handling shuttering carpentry.
Free, no obligation. One local specialist covering your area replies, not five.
- €55,000 to €125,000for an engineered ICF structural shell (raft, poured ICF walls, upper floor & roof)
- €2,350 to €3,100/m²turnkey A1-rated ICF house build cost in Ireland (€280,000–€550,000+)
- 0.11 to 0.15 W/m²Kcontinuous EPS insulated wall U-values with <0.6 ACH airtightness
- 2 to 3 weekstypical ICF wall erection & concrete pour to roof plate in damp Irish weather
ICF basements, split-level hillside houses & BS 8102 waterproofing
| Sub-Structure / Sloping-Site Build | 2026 Guide Rate (incl. VAT) | Engineering & Waterproofing Spec |
|---|---|---|
| Split-Level Lower-Ground Retaining ICF Storey | €2,550 to €3,400/m² | 200mm reinforced C35 concrete core, rear French land drain, Type A tanking + dimpled protection board |
| Full Habitable Underground ICF Basement | €2,900 to €4,100/m² | Dual BS 8102 Grade 3 protection: Type B crystalline waterproof concrete + Type A bonded membrane & waterstops |
| Structural ICF Retaining Wall Only (per m² wall) | €290 to €430/m² wall | Heavy vertical starter bars tied into reinforced heel/toe footing + 200mm–250mm concrete core |
Why sloping sites in Wicklow, Cork, Kerry, Galway & Donegal suit ICF
On steep rural and coastal plots, traditional blockwork cannot resist high lateral earth pressure without expensive shuttered reinforced-concrete retaining walls plus separate insulation layers. With a 200mm-core structural ICF block, the permanent formwork, steel reinforcement cage, monolithic earth-retaining concrete wall and continuous thermal insulation are built in a single operation.
- BS 8102 dual waterproofing (Type A + Type B): Combining a water-resisting crystalline concrete admixture (Type B) and hydrophilic swellable waterstop strips at the slab-to-wall kicker joint with an external peel-and-stick or liquid-applied tanking membrane protected by a dimpled drainage geocomposite sheet (Type A) keeps habitable lower bedrooms and cinema/gym rooms bone dry.
- Eliminating cold underground walls: Unlike bare shuttered concrete basements that require secondary internal stud framing, ICF wraps both faces of the below-ground concrete wall in closed-cell EPS from footing to upper floor.
Get an ICF shell or turnkey quote for your build
Select your project type, planning stage and county. Your enquiry goes to one experienced ICF contractor covering your county, who reviews your drawings, specifies block thickness and concrete core, and quotes in writing.
ICF construction guides, U-values & 2026 price breakdowns
Straight answers to what homeowners ask most: itemised 2026 costs, material specifications, drainage & planning rules, and what to check before you book.
More guides & resources: All guides & calculator hub · Technical & trade glossary · Frequently asked questions · All areas covered · Editorial standards · Contact · About this site
ICF basement & waterproofing questions
Can ICF walls act as structural earth-retaining walls on a sloping site?
Yes. When engineered by a Chartered Structural Engineer using a 200mm (or 250mm) concrete core block with specified vertical B500B high-yield rebar tied into a reinforced raft/strip footing heel, ICF walls resist up to 3.0 metres+ of backfilled soil pressure once the upper concrete floor slab braces the top of the wall.
How do you waterproof the joint between the concrete raft slab and the ICF basement wall?
A hydrophilic bentonite/polymer waterstop strip (and/or steel waterbar) is cast directly along the centreline of the concrete wall starter bars on top of the raft slab before the first course of ICF blocks is laid, sealing the cold joint permanently from the inside while a bonded Type A tanking membrane seals the exterior.
Can you get a mortgage, HomeBond warranty and BCAR sign-off for an ICF house in Ireland?
Yes. Mainstream Irish mortgage lenders (AIB, Bank of Ireland, PTSB and EBS), structural warranty providers and BCAR Assigned Certifiers accept ICF builds provided the block system holds a valid NSAI Agrément certificate or European Technical Assessment (ETA / CE mark), the concrete core and reinforcement schedule are signed off by a Chartered Structural Engineer (MIEI / MIStructE), and poured lifts are inspected before closing.
What U-values and airtightness ratings do ICF walls achieve?
Standard dual-100mm graphite-enhanced EPS ICF blocks poured with a 150mm reinforced concrete core deliver a wall U-value of 0.14 to 0.15 W/m²K — comfortably beating Ireland's NZEB Part L wall requirement (0.18 W/m²K). Upgrading the outer EPS leaf to 150mm–200mm lowers the U-value to 0.11 W/m²K for certified Passive House projects. Because the poured concrete core forms a continuous, joint-free structure, blower-door tests routinely record <0.6 ACH @ 50 Pa when paired with taped window bucks and MVHR.
ICF construction contractors across all 26 counties
Enquiries from all 26 counties go to one experienced ICF construction specialist covering your county — from Dublin, Cork, Galway and Meath to Kildare, Wicklow, Limerick, Wexford and Donegal. Pick your county below for local CSO one-off build stats, Met Éireann wet-weather build notes and 2026 ICF prices. Compare all areas covered →
Have floor plans or pricing an ICF self-build or extension?
One experienced ICF contractor covering your county reviews your architectural drawings, calculates EPS block U-values, rebar and concrete volumes, and provides a written itemised quote.