One-off ICF houses & self-build packages in Ireland

Across rural and suburban Ireland, self-builders use ICF structural shell packages (€55,000 to €125,000) or full turnkey contracts (€2,350 to €3,100/m²) to get from foundation slab to roof plate in 2 to 3 weeks without wet-weather blockwork delays.

See how stage drawdowns, NSAI/ETA certification and shell-to-turnkey packages work below.

Free, no obligation. One local specialist covering your area replies, not five.

  • €55,000 to €125,000for an engineered ICF structural shell (raft, poured ICF walls, upper floor & roof)
  • €2,350 to €3,100/m²turnkey A1-rated ICF house build cost in Ireland (€280,000–€550,000+)
  • 0.11 to 0.15 W/m²Kcontinuous EPS insulated wall U-values with <0.6 ACH airtightness
  • 2 to 3 weekstypical ICF wall erection & concrete pour to roof plate in damp Irish weather

Self-build & turnkey one-off ICF packages in Ireland

One-Off House RouteTypical Floor Area2026 Guide BudgetWho suits this route best
ICF Shell-Only Self-Build (Direct Labour)140 to 240 m²€55,000 to €125,000Self-builders managing follow-on roofers, window fitters, electricians & plumbers directly
Weathertight Builders' Finish ICF Home140 to 240 m²€155,000 to €315,000Homeowners locking in an airtight shell + windows + roof + render before finishing interiors
Full Turnkey Main-Contractor ICF Home130 to 220 m²€305,000 to €550,000+Single-point BCAR contract from site clearance to A1 BER certificate & painted handover

How a 2–3 week ICF one-off house shell goes up on an Irish rural site

  1. Week 1 — Insulated EPS raft or strip foundation with starter bars: After topsoil strip and compacted Clause 804 hardcore blinding, an L-shaped EPS perimeter cradle with 300mm under-slab insulation, radon sump/membrane and vertical B500B steel starter dowels is poured level within ±3mm laser tolerance.
  2. Week 2 — Stacking interlocking forms, window bucks & alignment bracing: Courses of graphite EPS forms lock tightly over the starter bars, horizontal rebar is clipped into the internal polypropylene webs on every course, treated timber/composite window bucks frame every opening, and raking steel alignment props + walk-boards plumb every wall to ±2mm.
  3. Week 3 — Monolithic concrete pour, hollowcore lift & gable courses: Ready-mix C30/37 concrete is pumped in controlled lifts around the perimeter and vibrated internally; precast hollowcore slabs land within days, and first-floor/gable ICF courses follow immediately to roof plate.

BCAR sign-off, NSAI Agrément & Irish mortgage stage payments

Whether you opt for BCAR Statutory Certification (Assigned Certifier) or the single-dwelling Opt-Out route where your bank's supervising engineer/architect signs Interim Stage Certificates, your ICF contractor supplies batch declarations of performance (NSAI Agrément or ETA/CE), structural engineer rebar pre-pour inspection sign-off, and concrete cube-test compression certificates so stage drawdowns release smoothly.

Get an ICF shell or turnkey quote for your build

Select your project type, planning stage and county. Your enquiry goes to one experienced ICF contractor covering your county, who reviews your drawings, specifies block thickness and concrete core, and quotes in writing.

What do you need built?

Pick the closest match.

ICF construction guides, U-values & 2026 price breakdowns

Straight answers to what homeowners ask most: itemised 2026 costs, material specifications, drainage & planning rules, and what to check before you book.

Cost & Shell PricingICF house build cost in Ireland (2026 price guide)Itemised 2026 Irish ICF prices: wall superstructure €210–€310/m² wall area, structural ICF shells €55,000–€125,000, and turnkey A1-rated homes €2,350–€3,100/m² (€280,000–€550,000+).Read the guide →One-Off Homes & BCAROne-off ICF houses & self-build packagesRural and suburban one-off ICF homes erected from insulated raft foundation to roof plate in 2–3 weeks — NSAI Agrément / ETA certification, mortgage stage drawdowns and BCAR sign-off.Read the guide →Build System ComparisonICF vs cavity block vs timber frame in IrelandSide-by-side 2026 comparison of Irish build costs, U-values (0.11–0.15 W/m²K), airtightness (<0.6 ACH), wet-weather site speed, acoustic soundproofing (Rw 52–58 dB) and thermal mass.Read the guide →Extensions & RenovationsICF house extensions & wraparound buildsFast, clean single-storey and two-storey ICF kitchen extensions (€2,500–€3,350/m² turnkey or €18,000–€38,000 structural shell) with slim wall footprints in damp Irish weather.Read the guide →Basements & Split-LevelsICF basements, split-level homes & retaining wallsReinforced 200mm concrete-core ICF basements and split-level hillside houses engineered to BS 8102 Type A + Type B waterproofing standards (€2,900–€4,100/m²).Read the guide →U-Values & AirtightnessPassive House & NZEB compliance with ICFAchieving 0.11–0.15 W/m²K U-values, <0.6 ACH @ 50 Pa airtightness, thermal-bridge-free EPS junctions, triple-glazed window buck detailing, MVHR and A1 BER ratings.Read the guide →Guides & Calculator HubICF Construction Ireland guides, calculator & referenceAll ICF construction guides in Ireland: 2026 shell and turnkey costs, interactive m² calculator, ICF vs cavity block vs timber frame, extensions, basements, Passive House specs and all 26 counties.Read the guide →Technical ReferenceICF Construction Ireland glossary of terms & specificationsPlain-English engineering glossary of 15 Insulated Concrete Formwork (ICF), U-value, airtightness, waterproofing and Irish BCAR terms.Read the guide →

More guides & resources: All guides & calculator hub · Technical & trade glossary · Frequently asked questions · All areas covered · Editorial standards · Contact · About this site

One-off self-build & planning conversion questions

Can I project-manage my own ICF self-build after the shell is poured?

Yes. Many Irish self-builders hire a specialist ICF crew strictly for the engineered raft foundation, poured ICF walls, hollowcore first floor and roof structure (€55,000 to €125,000), because the dangerous structural concrete pour and alignment bracing are handled by experienced specialists, leaving clean internal EPS chases for your electrician, plumber and dry-liner.

Can existing cavity-block planning drawings be converted to ICF without re-applying for planning?

In almost all cases, yes. Provided the external building dimensions, ridge height, window positions and external finish (e.g. nap/silicone render or stone cladding) match your granted planning drawings, changing the internal structural wall build-up from 350mm–400mm cavity block to a 350mm–400mm ICF wall does not require a new planning application — your structural engineer simply updates the construction & BCAR drawings.

Can you get a mortgage, HomeBond warranty and BCAR sign-off for an ICF house in Ireland?

Yes. Mainstream Irish mortgage lenders (AIB, Bank of Ireland, PTSB and EBS), structural warranty providers and BCAR Assigned Certifiers accept ICF builds provided the block system holds a valid NSAI Agrément certificate or European Technical Assessment (ETA / CE mark), the concrete core and reinforcement schedule are signed off by a Chartered Structural Engineer (MIEI / MIStructE), and poured lifts are inspected before closing.

What U-values and airtightness ratings do ICF walls achieve?

Standard dual-100mm graphite-enhanced EPS ICF blocks poured with a 150mm reinforced concrete core deliver a wall U-value of 0.14 to 0.15 W/m²K — comfortably beating Ireland's NZEB Part L wall requirement (0.18 W/m²K). Upgrading the outer EPS leaf to 150mm–200mm lowers the U-value to 0.11 W/m²K for certified Passive House projects. Because the poured concrete core forms a continuous, joint-free structure, blower-door tests routinely record <0.6 ACH @ 50 Pa when paired with taped window bucks and MVHR.

ICF construction contractors across all 26 counties

Enquiries from all 26 counties go to one experienced ICF construction specialist covering your county — from Dublin, Cork, Galway and Meath to Kildare, Wicklow, Limerick, Wexford and Donegal. Pick your county below for local CSO one-off build stats, Met Éireann wet-weather build notes and 2026 ICF prices. Compare all areas covered →

Have floor plans or pricing an ICF self-build or extension?

One experienced ICF contractor covering your county reviews your architectural drawings, calculates EPS block U-values, rebar and concrete volumes, and provides a written itemised quote.